Automated resonance assignment with FLYA (EMBO 2013)

In this tutorial we want to determine the resonance assignments and the structure of a protein using the program CYANA.

CYANA setup for the EMBO Practical Course NMR in Basel (20–27 July 2013)

Please follow the following steps carefully (exact Linux commands are given below):

1. From your home directory, change to the directory 'guentert'.
2. Execute the setup script.
3. Download the input data for the partical.
4. Unpack the input data for the practical.
5. Change into the subdirectory 'flyaembo' where the input data for the practical are.
6. Test whether CYANA can be started by typing its name, 'cyana'.
7. Exit from CYANA by typing 'q' or 'quit'.

cd ~/guentert
source setup-guentert
wget 'http://www.cyana.org/
tar zxf flyaembo.tgz
cd flyaembo
cyana
___________________________________________________________________

CYANA 3.96 (linux-intel)
 
Copyright (c) 2002-12 Peter Guentert. All rights reserved.
___________________________________________________________________

    Time-limited license valid until 2013-12-31.
    Library file "/home/guentert/src/cyana-3.96/lib/cyana.lib" read, 38 residue types.
    Sequence file "demo.seq" read, 114 residues.
cyana> q

If all worked, you are ready to go!

If you want to return to your practical later, using your own Linux or Mac OS X computer, you can download the demo version of CYANA from here. This is not necessary on the workshop computers where the software is already installed.

Experimental input data

The protein sequence is stored in three-letter code in the file 'demo.seq'.

The following spectra have been measured:

• [¹H,¹³C]-HSQC, called 'C13H1' in FLYA
• [¹H,¹⁵N]-HSQC, called 'N15H1' in FLYA
• HNCA
• HN(CO)CA, called 'HN_CO_CA' in FLYA
• HNCO
• HN(CA)CO, called 'HN_CA_CO' in FLYA
• CBCANH
• CBCACONH
• HBHACONH
• HCCH-TOCSY, called 'HCCH24' in FLYA
• HCCH-COSY, called 'HCCH7' in FLYA
• C(CO)NH, called 'C_CO_NH' in FLYA
• HC(CO)NH, called 'HC_CO_NH' in FLYA

Peak lists in XEASY format that have been prepared by automatic peak picking with the program NMRView are stored in files XXX.peaks, where XXX denotes the FLYA spectrum type.

Each peak list starts with a header that defines the experiment type and the order of dimensions. For instance, for HNCA.peaks:

# Number of dimensions 3
#FORMAT xeasy3D
#INAME 1 HN
#INAME 2 C
#INAME 3 N
#SPECTRUM HNCA  HN C N
      5   6.475  58.033  98.548 1 U   2.769E+02  0.000E+00 e 0     0     0     0
      6   6.476  62.123  98.126 1 U   2.571E+01  0.000E+00 e 0     0     0     0
      7   6.475  54.017  98.159 1 U   2.547E+01  0.000E+00 e 0     0     0     0

The first line specifies the number of dimensions (3 in this case). The '#SPECTRUM' lines gives the experiment type (HNCA, which refers to the corresponding experiment definition in the CYANA library), followed by an identifier for each dimension of the peak list (HN C N) that specifies which chemical shift is stored in the corresponding dimension of the peak list. These labels must match those in the corresponding experiment definition in the general CYANA library (see below). After the '#SPECTRUM' line follows one line for every peak. For example, the first peak in the 'HNCA.peaks' list has

• Peak number 5
• HN chemical shift 6.475 ppm
• C (CA) chemical shift 58.033 ppm
• N chemical shift 98.548 ppm

The other data are irrelevant for automated chemical shift assignment with FLYA. In particular, the peak volume or intensity (2.769E+02) is not used by the algorithm.

FLYA initialization script

The CYANA commands to run the automated assignment calculation are stored in two CYANA scripts or "macros".

One has the fixed name 'init.cya' and is executed automatically each time CYANA is started. It can also be called any one wants to reinitialize the program. It contains normally at least two commands that read the CYANA library and the protein sequence:

cyanalib
read demo.seq

The command 'cyanalib' reads the standard CYANA library. The second command reads the protein sequence.

Experiment definitions in the CYANA library

When you start CYANA, the program reads the library and displays the full path name of the library file. You can open the standard library file to inspect, for example, the NMR experiment definitions that define which expected peaks are generated by FLYA. For instance, the definition for the HNCA spectrum (search for 'HNCA' is

SPECTRUM HNCA  HN N C
 0.980  HN:H_AMI  N:N_AM*  C_A*  C_BYL  C:C_ALI
 0.800  HN:H_AMI  N:N_AMI  C_BYL  C_ALI  N_AMI  C:C_ALI

The first line corresponds to the '#SPECTRUM' line in the peak list. It specifies the experiment name and a label for the atoms that are detected in each dimension of the spectrum. The number of labels defines the dimensionality of the experiment (3 in case of HNCA).

Each line below defines a (formal) magnetization transfer pathway that gives rise to an expected peak. in the case of HNCA there are two lines, corresponding to the intraresidual and sequential peak. For instance, the definition for the intraresidual peak starts with the probability to observe the peak (0.980), followed by a series of atom types, e.g. H_AMI for amide proton etc. An expected peak is generated for each molecular fragment in which these atom types occur connected by single covalent bonds. The atoms whose chemical shifts appear in the spectrum are identified by their labels followed by ':', e.g. for HNCA 'HN:', 'N:', and 'C:'.

FLYA execution script

The CYANA script 'RUNFLYA.cya' contains the commands to perform the automated resonance assignment. It starts with the specification of the names of the input peak lists:

noesy:=N15NOESY,C13NOESY
scalar:=C13H1,N15H1,HCCH24,HCCH7,HNCA,HN_CA_CO,HNCO,HN_CO_CA,CBCANH,CBCACONH,HBHACONH,C_CO_NH,HC_CO_NH
#scalar:=C13H1,N15H1,CBCACONH,C_CO_NH,HC_CO_NH

"Through-space" experiments are given in the 'noesy:=...' statement; "through-bond" ones in the 'scalar:=...' statement. The peak list names are separated by commas (without blanks!).

These are followed by tolerances for chemical shift matching:

tolerance:=0.03,0.03,0.4
assigncs_accH:=tolerance(1)
assigncs_accC:=tolerance(3)
assigncs_accN:=tolerance(3)

In this case a tolerance of 0.03 ppm will be used for protons, and 0.4 ppm will be used for carbon and nitrogen.

Parameters for the FLYA algorithm come next:

run_assign_population:=20
run_assign_iterations:=15000
run_assign_reference:=ref.prot
analyze_assign_group:=CONBB: N H CA C CB / CONSOLIDATED, CONALL: CONSOLIDATED, BB: N H CA C CB, ALL:*
randomseed  := 3771

These define

• The population size for the genetic algorithm, i.e. how many assignments form one generation (20).
• The maximal number of iterations during local optimization (15000).
• A file with reference chemical shifts (ref.prot). These will not be used by the algorithm but only for a subsequent analysis of its results.
• Groups of atoms for which assignment statistics will be calculated and reported in the 'flya.txt' output file.
• The seed value for the random number generator. Any positive integer number can be used.

There might be a command to restrict the generation expected peaks to a subset of atoms:

command select_atoms
  atoms select "* - CZ ?H* @ARG - ?Z @LYS"
end

Here, the zeta atoms of Arg and Lys are excluded, i.e. no expected peaks will be generated for these atoms.

Finally, there is the command to start the FLYA algorithm:

flya refprot=ref.prot noesy=$noesy scalar=$scalar runs=5 #stage=1

Here, the given parameters of the 'flya' command specify that

• The results will be compared with the reference chemical shifts in the file 'ref.prot' (which have been determined independently by conventional methods).
• The input peak lists that will be used (as defined above).
• The number of independent runs of the algorithm, from which the consolidated shift will be calculated.