ENORA and multi-state structure calculations

In this tutorial we will provide you with a guided example for calculating eNOEs and a multi-state structure calculation.

To this end we will first run the modules of eNORA within CYANA and then use the obtained eNOEs to calculate a single state and a two-state structure model using automated sorting to separate the states. Along the way you will learn some additional CYANA skills useful for other purposes as well.

To finalize you will .... And ultimately you can try to improve ....

CYANA setup

Please follow the following steps carefully (exact Linux commands are given below; you may copy them to a terminal):

1. Go to your home directory (or data directory).
2. Get the data for the practical from the server (eNORA_multiState.tgz).
3. Unpack the input data for the practical.
4. Get the demo version of CYANA for this practical.
5. Unpack CYANA.
6. Setup the CYANA environment variables.
7. Change into the newly created directory 'eNORA'.
8. Copy the demo_data directory to 'enoe'.
9. Change into the subdirectory 'enoe'.
10. Test whether CYANA can be started by typing its name, 'cyana'.
11. Exit from CYANA by typing 'q' or 'quit'.
12. Download Chimera (to your personal laptop) from: Chimera

cd ~
wget 'http://www.cyana.org/wiki/images/6/64/eNORA_multiState.tar.gz'

tar zxf eNORA_multiState.tar.gz 

wget 'http://www.cyana.org/wiki/images/6/64/Cyana-3.98.9_Demo.tgz'
tar zxf Cyana-3.98.9_Demo.tgz
cd cyana-3.98.9/
./setup

cd ~

cd eNORA
cp -r demo_data enoe 
cd enoe

cyana
___________________________________________________________________

CYANA 3.98 (mac-intel)

Copyright (c) 2002-17 Peter Guentert. All rights reserved.
___________________________________________________________________

    Demo license valid for specific sequences until 2018-12-31
cyana> q

If all worked, you are ready to go in terms of everything related to CYANA!

If you want to return to your practical later, using your own Linux or Mac OS X computer, you can download the demo version of CYANA from [www.cyana.org/wiki/images/6/64/Cyana-3.98.9_Demo.tgz here].

Hint: More information on the CYANA commands etc. is in the CYANA 3.0 Reference Manual.

Execution scripts or "macros" in CYANA

For more complex task within CYANA, rather than to enter the execution commands line by line at the CYANA prompt, the necessary commands are collected in a file named '*.cya'. Collecting the commands in macros has the added advantage, that the macros serve as a record allowing to reconstruct previous calculations.

eNOE calculations

All eNOE related calculations within cyana are carried out using the eNORA modules.

NOESY experiment measured at different mixing times (keeping the mixing times as much as possible within the linear regime of NOE buildup) supply very precise distance restraints used for a structure calculation. In addition other restraints such as backbone angles from chemical shifts and scalar couplings for backbone and aromatic side chains are also used.

Experimental input data

Peak lists in XEASY format are prepared by automatic peak picking with a visualization program such as CcpNmr Analysis, NMRdraw or NMRview and saved as XXX.peaks, where XXX denotes the name of the xeasy peak list file. Since NMRdraw peak lists are of different file type, cyana provides the command read tab to convert the files to XEASY format.

# Number of dimensions 3
#FORMAT xeasy3D
#INAME 1 H
#INAME 2 HN
#INAME 3 N
#SPECTRUM N15NOESY H HN N
   17086    4.098    4.099   57.441 1 U   6.990943E+08  0.000000E+00 e 0  HA.5      HA.5       CA.5
   89532    4.355    1.829   33.507 1 U   1.720779E+06   0.000000E+00 e 0  HA.6      HB2.6     CB.6
   89544    4.353    1.757   33.513 1 U   2.939628E+06  0.000000E+00 e 0  HA.6      HB3.6     CB.6

The first line specifies the number of dimensions (3 in this case). The '#SPECTRUM' (no space between characters) lines gives the experiment type (N15NOESY, which refers to the corresponding experiment definition in the CYANA library), followed by an identifier for each dimension of the peak list (H HN N) that specifies which chemical shift is stored in the corresponding dimension of the peak list. The experiment type and identifiers must correspond to an experiment definition in the general CYANA library (see below) in most uses of the definition, here however we cheat slightly and get away with it. We are cheating, because for eNOE calculations we record our NOESY spectra with simultanous evolution of 13C and 15N dimensions, since we require 15N and 13C bound spins within the same spectrum for purposes of normalization (see...).

After the '#SPECTRUM' line follows one line for every peak. For example, the first peak in the 'HNCA.peaks' list has

• Peak number 17086
• H chemical shift 4.098 ppm
• ("HN") chemical shift 4.099 ppm (in this case 13C bound)
• Heavy atom chemical shift 57.441 ppm (in this case 13C labeled)

The other data are relevant entry for the eNOE mudules is the peak volume or intensity (6.990943E+08).

Hint: The formats of other CYANA files are described in the CYANA 3.0 Reference Manual.

The protein sequence is supplied by three-letter code in a XXX.seq file.

As part of the supplied data for the exercises there are two sequences:

• demo.seq

SPECTRUM definitions in the CYANA library

When you start CYANA, the program reads the library and displays the full path name of the library file. You can open the standard library file to inspect, for example, the NMR experiment definitions . For instance, the definition for the N15NOESY spectrum (search for 'N15NOESY' in the library file 'cyana.lib') is

SPECTRUM HNCA  HN N C
 0.980  HN:H_AMI  N:N_AM*  C:C_ALI  C_BYL
 0.800  HN:H_AMI  N:N_AMI  (C_ALI) C_BYL  C:C_ALI 

The first line corresponds to the '#SPECTRUM' line in the peak list. It specifies the experiment name and identifies the atoms that are detected in each dimension of the spectrum. The number of identifiers defines the dimensionality of the experiment (3 in case of HNCA).

Each line below defines a (formal) magnetization transfer pathway that gives rise to an expected peak. in the case of HNCA there are two lines, corresponding to the intraresidual and sequential peak. For instance, the definition for the intraresidual peak starts with the probability to observe the peak (0.980), followed by a series of atom types, e.g. H_AMI for amide proton etc. An expected peak is generated for each molecular fragment in which these atom types occur connected by single covalent bonds. The atoms whose chemical shifts appear in the spectrum are identified by their labels followed by ':', e.g. for HNCA 'HN:', 'N:', and 'C:'.

Hint: For information on how to use the vi terminal editor: vi editor

eNORA

• work in the copy of the data directory ('cd enoe')

Using the text editor of your choice, create your 'init.cya' macro as outlined below (The init macro) and also your 'CALC_enoe.cya' macro. Be extra careful to avoid typos and unwanted spaces in coma lists etc.

The init macro

The initialization macro file has the fixed name 'init.cya' and is executed automatically each time CYANA is started. It can also be called any time one wants to reinitialize the program by typing 'init'. It contains normally at least two commands that read the CYANA library and the protein sequence:

rmsdrange:=15-111
cyanalib
read demo.seq

The first line sets the appropriate rmsdrange, and the command 'cyanalib' reads the standard CYANA library. The next command reads the protein sequence.

The protein sequence is stored in three-letter code in the file 'demo.seq'.

The eNORA CALC macro

The 'CALC_enoe.cya' starts with the specification of the names of the input peak lists:

• The input peak lists that will be used (as defined above).

When you have prepared the 'init.cya' and the 'CALC_enoe.cya' try to run the macro.

To run the FLYA calculation, one could start CYANA and execute the 'CALC.cya' macro from the CYANA prompt, however on a computer with multiple processors it is better to speed up the calculation by running the 'CALC.cya' macro in parallel:

cyana CALC_enoe.cya

eNORA output files

The FLYA algorithm will produce the following output files:

• enoe.ovw: Consensus ....

The enoe.ovw file

• #Expected: Total number of expected peaks
• noRef: Number of expected peaks with missing reference shifts
• noPeak: Number of expected peaks for which no peak can be measured

There is more information on the results of the assignment calculation in the 'flya.txt' file (not described here).

Exercise xx: Mapping calculated eNOE restraints onto a known structure

One can map the calculated restraints, such as distance restraints (upl/lol) onto a known structure (in the example here an xray structure). This is another approach to analyze restraints and their influence on the results.

Below you find the commands to accomplish this. You see by studying the commands, which files are needed to execute the macro. Therefore, create a new directory ('mkdir') or copy a directory containing the respective files. Delete what you do not need. Use the regularized xray structure from exercise 11.

Commands preceded by hashtags (#) are commented out, remove the hashtags if you want to use them. If you decide to use the intermo-NOEx-cycle7.peaks file, make sure to comment any commands you no longer need.

You need an init file:

rmsdrange:=15-111,333
cyanalib
read lib LIG.lib append

And the main macro (name it 'CALC_xraymap.cya'):

read seq demoLong.seq

The following block of commands, takes the assigned intermol.peaks list and calculates distance restraints from the peak intensities:

#peaks:=intermol-NOEs-cycle7.peaks
#calibration peaks=$peaks
#peaks calibrate simple
#write upl intermol.upl

The following block of commands, reads the 'final.upl' list (in this case of neoassign) and selects the intermolecular NOEs to LIG and writes them to file:

read upl final.upl
distance select "*, @LIG" info=full
write intermol.upl

read intermol.upl unknown=warn

#read upl lig.upl append
#read lol lig.lol

read regula.pdb unknown=warn

weight_vdw=0
overview intermol_xray.ovw

• If the restraints do not match with the xray structure, does it mean they are wrong?
• If you tried the two options, what is (are) the difference(s)?
• Did you look at the LIG.upl/lol files in the demo_data folder, what are they? What type of NMR experiments are there to obtain them?

Using Talos to generate torsion angle restraints

Torsion angle restraints from the backbone chemical shifts help restrict angular conformation space. We wish to use only "strong assignments" to generate these restraints.

If you do not have TALOS installed get it from here. It is part of the nmrpipe software package.

Exercise x: Calculate backbone torsion angle restraints using Talos

Hint: Copy the FLYA results into a new folder, since otherwise you will overwrite your original 'flya.prot' file.

Essentially you will need to copy the details directory and the 'flya.prot' file.

cp -r flyabb acoPREP
cd acoPREP
rm *.peaks *.out *.job

Use a text editor of your choice to create a 'CALC.cya' file with the commands to calculate the talos angle restraints.

TALOS is used to generate torsion angle restraints from the backbone chemical shifts in 'flya.prot'.

consolidate reference=flya.prot file=flya.tab plot=flya.pdf prot=details/a[0-9][0-9][0-9].prot

This overwrites the original flya.prot with only strong assignments.

read prot flya-strong.prot unknown=skip

talos talos=talos+                
talosaco pred.tab

write aco talos.aco

This will call the program TALOS+ and store the resulting torsion angle restraints in the file 'talos.aco'.

Since this is not a calculation suited for the MPI scheduler, start CYANA first, then call the 'CALC.cya' macro from the prompt.

Hint: change to a cshell before running cyana (since talos needs a cshell to run):

csh

Multi-state structure calculation

We will perform calculations based on eNOEs by using torsion angle dynamics in order to compute the three-dimensional structure of the protein.

The 'enoe.upl and enoe.lol' files will be used together with the aco based on chemical shifts of the backbone and scalar couplings from backbone, Ha-HB and aromatic residues determined by experiment.

Exercise x: Calculate a single state structure

Copy the 'flyabb' directory and give it the name 'noebb', then delete all the files and data we do not need to reduce clutter and have better oversight.

cp -r flyabb noebb
cd noebb
rm *asn.peaks *exp.peaks *.out *.job
rm -rf details

From the directory 'acoPREP' copy the calculated talos restraints ('talos.aco').

Inside the 'noebb' directory, use a text editor to edit the 'CALC.cya' file for noeassign as outlined.

The single state CALC macro

restraints:= talos.aco                    		
structures := 100,20                      		
steps:= 10000                       		
randomseed:= 434726    
                  		

To speed up the calculation, you can set optionally in 'CALC_sState.cya':

structures:=50,10
steps=5000

These commands tell the program to calculate, in each cycle, 50 conformers, and to analyze the best 10 of them. 5000 torsion angle dynamics steps will be applied per conformer. If you do not set these option 100 conformers will be calculate, and the 20 best will be analyzed and kept.

When you are done preparing the macros as outlined run the calculation.

The structure calculation will be performed by running the 'CALC_sState.cya' macro:

cyana -n 33 CALC_sState.cya

Doing this, basically means each processor will calculate 100/33=3 conformers. If you changed the setup to calculate 50 structures, you would start the calculation with 'cyana -n 25 CALC_sState.cya'.

Carefully analyze the WARNING and ERROR messages if any.

Statistics on the the structure calculation will be displayed to screen.

The final structure will be 'final.pdb'. You can visualize it, for example, with the command

chimera final.pdb

Analyze the result, the bundle seems unnatuarly tight for an NMR structure bundle. Why?

Exercise x: A two-state structure calculation

Copy the noebb directory and give it the name noecc, then delete all the previous, unnecessary output files to reduce clutter and have better oversight.

cp -r noebb noecc
cd noecc
rm *cycle* *.out *.job final* rama*

Update the 'init.cya' file in order to read the ligand library file and the

The PREP macro

Update the your previous 'CALC_sState.cya' macro by adding the

Run the calculation:

cyana -n 33 CALC.cya

Results: grouping the structures and analysis

Exercise xx: Preparing an xray structure to use within CYANA

Deposited structures often lack specific features. i.e. Xray structures usually lack proton coordinates.

Copy your noecc results to a new directory call regulabb, then delete all the previous, unnecessary output files to reduce clutter and have better oversight.

cp -r noecc regulabb
cd regulabb
rm *cycle* *.out *.job

After reading the sequence file, the pdb file can be read with the option unknown=warn or unknown=skip, this will then skip the parts of the molecule not specified in the sequence file.

read pdb xxxx.pdb unknown=warn

Other options to read pdb's:

read 5c5a.pdb unknown=warn hetatm new

where the option 'hetatm' allows for reading of coordinate labeled HETATM, rather than ATOM in the pdb. 'new' will read the sequence from the pdb.

To write back out pdb's and sequences:

write pdb XXX.pdb
write seq XXX.seq  

Inspect the pdb using chimera: Now, there are several issues besides HETATM, that make the comparison to the calculated NMR structure not possible within CYANA before you fix them. You may use a graphical text editor to fix them. In the end, you need to have a conformer of the complex ready to compare with the calculated NMR structure.

Best would be to practice the use of the 'regularize' command as well. This is however not really necessary in this particular case, since this xray structure contains proton coordinates. Using the regularize command one can get a structure calculated within CYANA that has these features but still is very close to the input structure of your choice.

Create an 'init.cya' macro with:

cyanalib

Then create a 'CALC_reg.cya' macro with:

read 5c5a.pdb unknown=warn hetatm new
write 5c5a_Ed.seq 
write 5c5a_Ed.pdb

#renumber and rename the ligand from 201 333, NUT to LIG
library rename "@NUT" residue=LIG
atoms select @LIG
atoms set residue=333

write 5c5a_renum.seq
write 5c5a_renum.pdb

#sequence with ligand but without linker
read demoLongEd.seq
read 5c5a_renum.pdb rigid unknown=warn

write XrayAChainRenum.pdb

initialize

read seq demoLong.seq
read pdb XrayAChainRenum.pdb unknown=warn

write pdb test.pdb

read pdb test.pdb
regularize steps=20000 link=LL keep

Execute the 'CALC_reg.cya' macro in the CYANA shell (or use only one processor, do not distribute the job):

cyana CALC_reg.cya

Exercise xx: Calclulate the RMSD of NMR vs. xray structure using a CYANA macro

Using the INCLAN language of CYANA (Writing and using INCLAN macros,Using INCLAN variables,Using INCLAN control statements) it is possible to write complex macros that interact with the FORTRAN code of CYANA. Reading internal variables and manipulating them to achieves custom task.

• save the manually edited xray structure (exercise 11) or the the regularized xray structure (containing the ligand and called 'regula.pdb') as 'reg_xray.pdb' to use the macro below (or change the name in the macro accordingly).
• what do you think about the RMSD, does the value make sense? Does the range make sense?

Below you find the commands for a macro (call it 'CALC_RMSD.cya') that will read the regularized xray structure and the calculated nmr structure, then calculating the rmsd of both the protein and ligand parts of the complex:

read demoLong.seq

rmsd range=15-111 structure=final.pdb reference=reg_xray.pdb

atom select "BACKBONE 15-111"
t=rmsdmean
j=rindex('333')
n=0
s=0.0
do i ifira(j) ifira(j+1)-1
  if (element(i).gt.1) then
    n=n+1
    s=s+displacement(i)
   end if
end do
print "RMSD of the LIG: ${s/n} ($n atoms)"

read pdb final.pdb
structure mean
write pdb mean.pdb

read pdb mean.pdb
read pdb reg_xray.pdb append

atom select "BACKBONE 15-111"
t=rmsdmean
atom select "WITHCOORDALL"
j=rindex('333')
n=0
s=0.0
do i ifira(j) ifira(j+1)-1
  if (element(i).gt.1.and.asel(i)) then
    n=n+1
    s=s+displacement(i)*2
  end if
end do
print "Displacement of the LIG (to ref xray): ${s/n} ($n atoms)"

Beyond The Basics: xxxx

eNORA options

There are a variety of commands to modify eNORA runs to accommodate experimental labeling schemes or etc...

Input structures

Exercise xx: Work on improving the final structure

Using what you have learned so far, employing some of the options

General questions to answer regarding this task:

• Name additional experimental restraints (or inputs) you could use for structure calculation.
• Name additional NMR experiments you could measure, to acquire experimental data that are not supplied with the demo_data.